Can I install this wallpaper myself?

Absolutely! Our peel and stick wallpaper is designed for easy DIY installation. Most customers complete a feature wall in under an hour. The panels are numbered, and the adhesive is repositionable, so you can adjust as you go.

What surfaces can I apply the wallpaper to?

Our wallpaper adheres best to smooth, clean, dry surfaces including painted drywall, glass, metal, and smooth wood. Avoid textured walls, freshly painted surfaces (wait 4+ weeks), and porous surfaces like brick or unfinished wood.

How do I remove air bubbles?

Use a squeegee or credit card wrapped in a soft cloth to push bubbles towards the nearest edge. Work from the centre outward. Small bubbles often disappear on their own within 24-48 hours as the adhesive fully cures.

Can I remove and reposition the wallpaper?

Yes! Our wallpaper is repositionable during installation. If you need to adjust, gently peel back the panel and reapply. For best adhesion, try to limit repositioning to 2-3 times per panel.

Will it damage my walls when removed?

When applied to properly prepared surfaces, our wallpaper removes cleanly without damaging paint or leaving residue. Peel slowly at a 45-degree angle for best results. This makes it perfect for renters!

How do I clean the wallpaper after installation?

Wipe gently with a slightly damp cloth. Avoid abrasive cleaners, harsh chemicals, or excessive moisture. For stubborn marks, use a mild soap solution and pat dry.

What's the ideal room temperature for installation?

Install in temperatures between 18-25°C (65-77°F) for optimal adhesion. Avoid installing in extremely cold, hot, or humid conditions as this can affect the adhesive performance.

Wallpaper Installation Guide

What's Included With Your Order

Everything you need for a successful installation

Numbered Panels

Custom sized to your wall dimensions

Printed Instructions

Step-by-step guide included

Video Tutorial

QR code link to video guide

Watch the Installation Tutorial

Follow along with our step-by-step video guide for a flawless installation

Installation Difficulty Estimator

Enter your wall dimensions and select any obstacles to estimate difficulty

Wall Dimensions (metres)

Width

Height

Obstacles & Features

Power Outlets

Each outlet requires careful cutting

Light Switches

Similar to outlets, needs precision

Windows

Requires trimming around frames

Door Frames

Complex cutting around frame edges

Inside Corners

Requires folding or seaming technique

Enter your wall dimensions to see
the estimated difficulty

Tools You'll Need

Gather these items before you start for a smooth installation

Spirit Level

For marking a straight vertical guideline

Measuring Tape

To measure wall dimensions and panel placement

Pencil

For light markings on the wall

Squeegee or Smoothing Tool

To remove air bubbles as you apply each panel

Sharp Craft Knife

For trimming excess around edges and outlets

Step Ladder

To reach the top of your wall safely

Clean Cloth

For smoothing and cleaning the wall

Step-by-Step Installation

Follow these four simple steps for a professional-looking result

01

Prepare Your Wall

Clean your wall with a damp cloth and let it dry completely. Walls should be smooth, dry, and free of dust. For best results, walls should be painted at least 4 weeks prior.

Remove any nails, hooks, outlet covers, or switch plates
Fill in holes with filler and sand smooth until level
Wipe down with a slightly damp cloth to remove dust
Allow wall to dry completely (at least 24 hours if freshly cleaned)
Avoid heavily textured or freshly painted surfaces

02

Plan Your Layout

Lay out your numbered panels in order before starting. Start from the left side of your wall and work right. Use a level to mark a straight vertical line where your first panel will go.

Unroll all panels and lay them flat to acclimatise (15-30 minutes)
Verify panel numbers match the layout guide provided
Use a spirit level to draw a faint vertical guideline
Mark panel positions lightly with pencil if helpful
Have all tools ready: squeegee, sharp blade, measuring tape

03

Apply First Panel

Peel back 30cm of backing from the top of Panel 1. Align with your marked line and press firmly. Continue peeling and smoothing downward, using a squeegee or soft cloth to remove air bubbles.

Start at the top corner, aligning with your vertical guideline
Peel backing gradually as you smooth downward
Use a squeegee or credit card wrapped in cloth to push out bubbles
Work from the centre outward to edges
The adhesive is repositionable—gently peel back and adjust if needed

04

Match & Continue

Overlap Panel 2 by 15mm onto Panel 1, matching the pattern precisely. Each panel includes a 15mm overlap allowance for seamless joins. Repeat for remaining panels.

Overlap the next panel by 15mm onto the previous one
Patterns are designed to align horizontally across panels
Take your time matching the pattern at eye level first
Small adjustments are possible while adhesive sets
Trim excess at top, bottom, and around outlets with a sharp blade

Pro Tips for Perfect Results

Temperature

Install in room temperature (18-25°C) for best adhesion. Avoid extremes.

Bubbles

Small bubbles usually disappear within 24-48 hours as adhesive cures.

Removal

To remove, peel slowly at a 45° angle. Leaves no residue on properly prepared walls.

Patience

Take your time with alignment. The adhesive allows repositioning for the first few minutes.

Installation FAQs

Common questions about installing our peel and stick wallpaper

Prefer Professional Installation?

Let our expert installers handle everything. Available in Sydney, Melbourne & Brisbane.

Book Installation Email Support

Stay Organized

Installation Checklist

Print this checklist to guide you through each step of your wallpaper installation. Tick off items as you complete them.

Installation Guide